Below are a few links for the cad drawings of the rubber band gun. When it prompts you to open the file or save it probably would be the best idea to save it to disk and then open it at your own leasure. All files are in *.prt format. To view these files you will have to use cadkey97 Release 1. If you want more information on how to get cadkey or to view these files go to www.cadkey.com.
The Gun body (3d) - This prt file is for the gunbody and is fully described (about 396k)
Buttress Trigger- This prt file is a complete drawing of the buttress for the gun. (about 226k)
Firing Hammer- This is the compete prt file for the firing hammer for our design (about 236k)
Gun Barrel- The name say's it all for this drawing. (about 137k)
springs and rotating barrel- This prt file contains the rotating barrel in one layout and in the other layout it contains pin spring, barrel loading spring, firing pin and firing hammer spring (about 814k)
Springs- This file has the firing hammer spring and the trigger spring in the same layout. (about 60K)
Trigger- This is a link to the trigger of the gun. (about 238k)
Assembly view- This is a link to the assembly view of the gun. This is probably the most usefull prt file that someone could download because it contains every part mentioned above. (about 1377k)
Home | Other Links | Pictures | Cad Drawings | Contact Information